Miele PFD 104 SCVi XXL Kurzgebrauchsanweisung Seite 33


This dishwasher must only be operated by appropriately trained
personnel. They must be instructed and trained regularly.

Before using the dishwasher, check it for any externally visible
damage. Do not use a damaged dishwasher. This could be danger-
ous.

In the event of a damaged or leaking dishwasher, switch off at the
power supply immediately and call the Miele Customer Service De-
partment, a Miele dealer or a suitably qualified service technician.

Faulty components must only be replaced by genuine Miele ori-
ginal spare parts. Only when these parts are fitted can Miele guaran-
tee the correct functioning and safety of the appliance.

The electrical safety of this dishwasher can only be guaranteed
when correctly earthed. If in any doubt, please have the electrical in-
stallation tested by a qualified electrician.

Please follow the advice on installation in these instructions and
the separate Installation diagram.

Before connecting the appliance, ensure that the connection data
on the data plate (voltage, frequency and fuse rating) match the
mains electrical supply.

The dishwasher may only be operated if the door opening mech-
anism is working correctly. Otherwise there could be a risk of danger
whilst the automatic door opening mechanism (depending on the
model) is active.
The maximum weight of the front panel that can be aligned with the
factory fitted door springs is 10–12 kg (depending on the model).
Signs that the door opening mechanism is working correctly:
- The door springs must be evenly adjusted on both sides. They are
correctly adjusted when the door remains stationary when left half
open (approx. 45° opening angle). It is also important that the
door cannot fall open.
en - Warning and Safety instructions
33