Intended Use; General Safety Warnings; Electrical Safety - Ryobi RBV2800CSV Bedienungsanleitung

Safety, performance, and dependability have
been given top priority in the design of your
electric blower/vacuum.

INTENDED USE

The electric blower/vacuum is intended only
for outdoor use in dry and well-illuminated
conditions.
The product is not intended to be used by
children or persons with reduced physical,
mental, or sensory capabilities.
The product is designed for blowing or
vacuuming light debris, such as leaves, grass,
and other garden refuse. It is intended to
vacuum and mulch debris and deposit it into
the collection bag.
The product is not designed to suck in water or
other liquids.
Do not use the product for any other purpose.

GENERAL SAFETY WARNINGS

WARNING! Read all safety warnings and
all instructions. Failure to follow the warnings
and instructions may result in electric shock,
fire, and serious injury. Save all warnings and
instructions for future reference.
WARNING! Never allow children or people
who are unfamiliar with these instructions to
use the product. Local regulations may restrict
the age of the operator. Children should be
adequately supervised to ensure that they do
not play with the product.
TRAINING
■ Read the instructions carefully. Be familiar
with the controls and the correct use of the
product.
■ Keep in mind that the operator or user
is responsible for accidents or hazards
occurring to other people or their property.
■ Do not use the product while tired, ill, or
under the influence of drugs, alcohol, or
medication.

ELECTRICAL SAFETY

■ Power tool plugs must match the outlet.
Never modify the plug in any way. Do
not use any adapter plugs with earthed
(grounded) power tools. Unmodified plugs
and matching outlets will reduce risk of
electric shock.
■ Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges,
and refrigerators. There is an increased risk
of electric shock if your body is earthed or
grounded.
■ Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
■ Do not abuse the cord. Never use the
cord for carrying, pulling or unplugging the
power tool. Keep cord away from heat, oil,
sharp edges or moving parts. Damaged or
entangled cords increase the risk of electric
shock.
■ If the supply cord is damaged, it must be
replaced by a special cord or assembly
available from the manufacturer or its
service agent.
■ Before every use, examine the supply cord
for damage. If there are signs of damage,
it must be replaced by a qualified person
at an authorised service centre to avoid a
hazard.
■ If you need to use an extension cord,
ensure it is suitable for outdoor use and has
a current capacity rating sufficient to supply
the product. The extension cord cable
should be marked with either "H05 RN F" or
"H05 VV F". Check the extension cord before
every use for damage. Always uncoil the
extension cord during use because coiled
cords can overheat. Damaged extension
cords should not be repaired, they should
be replaced with an equivalent type.
■ Avoid unintentional starting. Always check
that the switch is in the off position before
plugging in the product to the power supply.
Do not carry a plugged in product with your
finger on the switch.
■ Electrical power should be supplied via a
residual current device (RCD) with a tripping
current of not more than 30 mA.
■ Make sure that the power cord is positioned
so that it will not be stepped on, tripped
over, or otherwise subjected to damage or
stress.
3
Original Instructions
EN
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
BG
UK
TR