Layout; Items Supplied; Intended Use; Proper Use - EINHELL TKS 1700 Bedienungsanleitung

Anleitung_TKS_1700_4340668:_
GB
Follow the instructions for lubrication and
changing tools.
Keep handles dry, clean and free from oil
and grease.
Keep the push stick or handle for a push
block at the machine at all times, even when
you are not using them.
Do not cut rebates or grooves without fitting
a suitable guard, e.g. a tunnel-type guard,
over the saw table.
Use only the transport device for
transporting the machine.
While you are moving the machine it is best
to cover the top part of the blade, for
example using a guard.
Do not misplace these safety instructions.

3. Layout

1. Saw bench
2. Saw blade guard
3. Extractor hose
4. Splitter
5. Saw blade
6. Table insert
7. Parallel stop
8. Hand crank
9. Adjustment and locking grip
10. Base frame
11. ON/OFF switch
12. Chain bar for parallel stop
13. Cross stop
14. Width extension table
15. Length extension table
16. Extractor adapter
17. Push stick
18. Legs
19. Longitudinal and cross-struts
20. Middle struts
21. Rubber feet
22. Stability bar
23. Table supports
24. Screw with wing nut
25. Oval holes
26. Countersunk screws
27. Fixing screw
28. Eccentric lever
18
13.05.2009 14:04 Uhr Seite 18
29. Groove
30. Knurled screw
31. Laser
32. ON/OFF Switch for laser
33. Screws for battery compartment
34. Battery compartment cover
35. Overload switch
Installation materials (Fig. 4)
a. 58 x Locking ring
b. 70 x Washer
c. 40 x Nut
d. 30 x Short hex screw
e. 4 x Long hex screw
f. 24 x Carriage bolt

4. Items supplied

Operating Instructions
2 x Battery 1.5V LR 03
Base frame
Bench circular saw
2 Carbide metal covered saw blades (1x 24
teeth, 1x 48 teeth)
Parallel stop
Cross stop
Push stick

5. Proper use

The bench-type circular saw is designed for the
slitting and cross-cutting (only with the cross
stop) of all types of timber, commensurate with
the machine's size. The machine is not to be
used for cutting any type of round wood.
The equipment may only be used for the tasks it
is designed to handle. Any other use is deemed
to be a case of misuse. The user/operator - not
the manufacturer - will be liable for any damage
or injuries caused as a result thereof.
Please note that our equipment has not been
designed for use in commercial, trade or
industrial applications. Our warranty will be
voided if the equipment is used in commercial,