Physical And Chemical Properties - CMS Brembana Maxima 309 Installations- Betriebs Und Wartungshandbuch

DESCRIPTION: Dispersed polytetrafluoroethylene with exceptional lubricant and detaching properties.
The product, after the evaporation of the solvent, appears dry, not oily, chemically inert, able to resist to
temperatures up to 300°C. It is 5 or 6 times more effective than normal siliconic detaching products in the
shake out process. Even better results are obtained if the PTFE is made melt on the mould surface at 300 –
315°C for 5 – 10 minutes. In this case, it makes a semi permanent, long duration film. Unlike the siliconic
detaching products, the PTFE allows subsequent manufacturing, e.g. printing, metalizing, painting, and
washing pieces with solvents or detergents is unnecessary. PTFE spray is a very exceptional lubricant when a
non oily lubrication is needed. It is particularly suitable for high precision devices and pieces that are in
contact with acids, corrosive atmospheres, alkali, solvents, water. It can be applied on every kind of material:
metals, rubber, wood, paper, plastic material.
COMPOSITION: polytetrafluoroethylene dispersed in isopropyl alcohol, pressurized with LPG.

PHYSICAL AND CHEMICAL PROPERTIES:

Appearance: aerosol container
•
Colour: transparent
•
Odour: characteristic of solvent
•
Density: 0.6 kg/l at 20°C
•
Pressure at 20°C: 4.0 bar
•
Flash point of the aerosol: < 21°C
•
INSTRUCTIONS FOR USE: Clean well the surface to be treated removing any residuals of other
detaching products. Shake well the container before use. Spray briefly and uniformly from a distance of
about 25 – 30 cm. Give a single coat.
CAUTIONS: Pressurized container. Store away from sunbeams and do not expose to temperatures above
50°C. Do not pierce or burn, not even after use. Do not spray on flames or incandescent objects. Keep far
from combustion sources. Do not smoke. Avoid spraying into eyes. Keep out of the reach of children. Use in
a well ventilated place. Take precautionary measures against static discharges. Do not exceed in spraying.
INDICATION OF DANGER AND ADVICE OF PRECAUTIONS:
R 12 extremely flammable
•
R 67 Vapours may cause drowsiness and dizziness
•
LABELING: F+ Extremely flammable
Note for users: the information contained in the present sheet is based on our knowledge in the date
of the last version. Users must verify the suitability and thoroughness of provided information
according to each specific use of the product. This document must not be regarded as a guarantee on
any specific product property. The producer is relieved from any liability arising from improper use.
SOLTECNO S.r.l.
Nuova Lottizzazione Bettolino – Via delle Industrie
Strada Provinciale 20 – 26010 – Salvirola CR
Telefono: 0373 270405 – Fax 0373 270397
Registered office: Via Volta, 22 – 20094 CORSICO MI
Telefono:++39-02-45864671 – Fax: ++39-02-4586442
www.soltecno.com
TECHNICAL DATA SHEET
PTFE SPRAY
E-mail: info@soltecno.com