Inhaltsverzeichnis
Werbung
Product :
Product code : 2303/IP
Special protective equipment for firefighters:
Useful precautions:
6. Accidental release measures.
General measures:
Methods for cleaning up:
- On soil:
- On water:
7. Handling and storage.
Storage:
Handling:
8. Exposure controls/personal protection.
Exposure limits:
Personal protection:
- Open spaces:
- Confined spaces:
Hand/eyes/skin protection:
Hygiene measures:
9. Physical and chemical properties (typical values).
Appearance:
Odour:
Colour
Density a 15°C:
Boiling point/range:
Vapour pressure:
Viscosity at 40°C:
PRODUCT SAFETY DATA SHEET
IP HYDRUS (ISO 46)
Version : 1,01
Wear a suitable breathing apparatus if smoke is present.
Avoid accidental sprays (i.e. from broken couplings) on hot surfaces or electrical
contacts (switches, outlets and the like).
In case of losses from pressurized circuits, the sprays may form oil mists. Take into
account that the lower explosion limit for oil mists is about 45 g oil/m³ air.
Shut off source of spill, if possible.
Contain spilled liquid with sand, earth or other suitable absorbents. Recover free
liquid. Clean contaminated area. Dispose of according to local regulations.
Confine the spillage. Remove from surface by skimming or suitable absorbents.
Notify local authorities according to regulations.
Storage temperature : ambient to 65°C max .
Store the product in cool, well ventilated surrounding.
Keep away from sources of ignition.
TLV-TWA (A.C.G.I.H. 2002): 5 mg/m³ ( mineral oil mists)
TLV-STEL (A.C.G.I.H. 2002): 10 mg/m³ ( mineral oil mists)
No special measures
Aspirators in case of oil mist; protective shields, in case of oil splashes.
Mineral oil resistant gloves, overalls. Gloves must be felt-lined.
Do not drink, eat or smoke with dirty hands.
Wash hands before going to the toilet.
Do not clean hands with dirty or oil-soaked rags.
Change clothes if they are dirty or soaked, and in any case at the end of the working
shift.
Wash hands with water and soap, do not use solvents or other irritant products
which have a defatting effect on the skin.
Liquid, bright & clear (ASTM D 4176/1).
Characteristic.
Not determined (ASTM D 1500)
880 kg/m³ (ASTM D 1298).
> 200 °C (at 10 mmHg) (ASTM D 1160)
1·10-3 hPa (20 °C)
44 mm²/s (ASTM D 445).
Date : 11/01/2002
ENI S.p.A. - Refining & Marketing Division
Page : 2/4
Werbung
Inhaltsverzeichnis
Fehlerbehebung
