CMS Brembana Maxima 309 Installations- Betriebs Und Wartungshandbuch Seite 185

Product :
Product code : 2302
1. Identification of the substance/preparation and of the company
Identification of the substance or
preparation:
Type of product and use:
Company identification:
Address and telephone Nr.:
2. Composition/information on ingredients.
Components:
3. Hazards identification.
Important hazards:
General informations:
4. First-aid measures.
Skin contact:
Eye contact:
Ingestion:
Aspiration of liquid into the lungs:
Inhalation:
5. Fire-fighting measures.
Extinguishing media:
- Suitable:
- Not to be used:
PRODUCT SAFETY DATA SHEET
AGIP OSO (ISO 32)
AGIP OSO 32.
Hydraulic oil
ENI S.p.A. - Refining & Marketing Division
Via Laurentina, 449 - 00142 ROMA ITALY
TEL. (+ 39) 06-59881
Paraffinic base stock, severely solvent refined (93 %wt min.) - CAS 101316-72-7
Paraffinic base stock, severely solvent refined (5 %wt min.) - CAS 64741-89-5
Additives.
This product is of low oral and dermal toxicity and under normal conditions of use
should present no significant health hazards. However, in common with most
mineral oils, prolonged and repeated skin contact may cause dermatitis. Handling
precautions must be strictly observed.
Any substance, in case of accidents involving pressurized circuits and the like, may
be accidentally injected under the skin, even without external damage.
In such a case, the victim should be brought to an hospital as soon as possible, to
get specialized medical treatment.
Take off contaminated clothing and shoes. Wash thoroughly with soap and water.
Flush with large amounts of water; if irritation persists, seek medical attention.
Do not induce vomiting to avoid aspiration into the lungs; seek medical attention.
If there is the possibility that the product has been aspired into the lungs (i.e. in case
of spontaneous vomiting), transport the victim to a hospital.
In case of exposure to a high concentration of vapours, remove the victim from
exposure; keep at rest; if necessary, seek medical attention.
Carbon dioxide, dry chemicals, foam, water spray (fog).
Do not use water jets. They could cause splattering, and spread the fire.
Version : 1,02
FAX (+ 39) 06-59885700
Date : 10/01/2002
Supersedes SDS dated : 9/05/1997
ENI S.p.A. - Refining & Marketing Division
Page : 1/4