Cleaning The Dust Box Seals - Miele HS18 Gebrauchsanweisung

en
 Release the roller brush cover and re-
move the cover.
 Remove the roller brush.
 Cut any threads or hairs that have
wound themselves around the roller
brush with a pair of scissors.
 Remove the threads and hair using
the wiper which is located on the bot-
tom of the cleaning tool.
 Hold the wiper over a bin.
 Press the button at the top of the
wiper several times until all threads
and hair have fallen out.
60
 Refit the roller brush. Make sure that
the side with the pointed end is inser-
ted into the corresponding slot.
 Carefully refit the roller brush cover,
making sure it clicks into position.
 Refit the side brushes, see "Cleaning
the side brushes".
In order to continue to achieve the
best possible cleaning results, re-
place the roller brush with a new one
after approx. 1 year.

Cleaning the dust box seals

Clean the seals on the bottom of the
dust box as required.
 Place the robot vacuum cleaner up-
side down on a level, clean surface.
 Wipe the seals with a slightly damp
cloth to clean them.