Clock Adjust - La San Marco NEW 105 TOUCH Serie Bedienung Und Wartung

NOTE:
During the programming of Steam, the other units remain disabled.
N.b. by pressing the tea key of the first unit (K6GR1), the dispensing of steam at a controlled temperature is
enabled, provided this function has been activated in the technical menu (the controlled temperature steam
function can only be enabled on the tea key of the first unit). If the same key continues to be pressed, the
temperature control of the milk will be by-passed and the spout will behave like a normal manual spout. If on
the other hand the controlled temperature steam function is not enabled, the tea key of the first unit will only
be one of the two keys for timed tea.
As for the tea key of the second unit, if it is pressed once only, the appliance will dispense timed tea, but if it
is pressed twice in rapid sequence, the appliance will dispense tea continuously
PROGRAMMING The CLOCK
In IDLe-ON status, press the K5GRx key and keep pressing it for more than 10 seconds; make sure that light-
ing of the LeDs l5GRx (1..3) switches from fixed to flashing.
Note:
when "Doses Setting" is displayed, keep pressing the K5GRx key (1..3) to switch to the "Clock Adjust"
phase.
Press the K3GR1 key (eNTeR) to confirm
The display shows
where hh = current time in hours (0...23)
mm = current time in minutes
xxx = day of the week
If you wish to modify the parameter, use the K1GR1 (+) or K2GR1 (-) keys, and confirm with K5GR1.
Press the K5GR1 key again to move on to setting automatic on/off.
AUTO ON/OFF- AUTOMATIC STARTING AND STOPPING
Designed to set the automatic starting and stopping times of dosage and the weekly closing day.
The display shows
The following are programmed in order:
- on time in hours (AAA = On)
- on time in minutes (AAA = On)
- off time in hours (AAA = Off)
- off time in minutes (AAA = Off)
- day off
To move from one to the other, press the K5GR1 key.
1 on time and 1 off time can be set, and they apply to all the days of the week.
If you do not wish to have automatic on and off, go to the programming of the corresponding time and press
K1GR1 (+) or K2GR1 (-) until the display shows:
The display shows

Clock adjust

Clock adjust
hh.mm XXXXXXXXX
Auto ON/OFF
aaa : hh.mm
67