Dispensing - La San Marco NEW 105 TOUCH Serie Bedienung Und Wartung

STOPPING
To stop the dosage function, keep the K5GR1 key pressed first, followed immediately by the K3GR1 key.
1° 2°
To switch to the IDLe ON status, press the K3GR1 key only.

7.2 Dispensing

COFFee CYCLe
DISPeNSING
In the idle-on status, press one of the four doses keys for the unit you wish to use for dispensing (for example,
K1GRx). both the dispensing solenoid valve EVx and the PUMP are energised, starting up the dispensing
phase.
both the pump and the solenoid valve will remain activated until the quantity of product programmed previ-
ously is achieved (volumetric meter pulses).
The LeD relating to the chosen dose stays on for the entire duration of coffee dispensing.
K1GRx
The display shows
Espresso
During dispensing, the display shows an indication of the dose dispensed (english version)
1 Espresso
2 Espressos
1 Coffee
2 Coffees
Continuous
tea
Steam
Note:
The dosage permits the contemporary dispensing of coffee from all the units envisaged by dosage.
STOP DISPeNSING COFFee WhILe IN PROGReSS
It is possible to interrupt dispensing while in progress before the pulses relating to the volumetric meter pro-
grammed are achieved. Simply press the key relating to the dispensing in progress.
This de-energises with immediate effect both the dispensing solenoid valve eVx and the PUMP, suspending
the dispensing and returning the dosage to idle-on status.
60