Starting The Ups With Utility - PowerWalker VFI ICT IoT Benutzerhandbuch

Submenu
Overload pre-alarm
External battery
Charger current
Dry in signal
Dry out signal
Ambient temperature
alarm
Battery remaining time
Date and time
LCD contrast
IoT
Modbus TCP
If the load type is a transformer type, it is recommended to enable the "start from bypass"
function.

4.5 Starting the UPS with utility

Available settings
[50%~105%]
[Auto detection],
[Manual EBM: 0~4],
[Manual Ah: 7~144Ah]
[2A], [4A], [6A], [8A] for long backup model
[Disabled], [Remote on], [Remote off], [Forced
bypass]
[load powered], [on bat], [Low bat], [bat open],
[bypass], [ups ok]
[enabled], [disabled]
[enabled], [disabled]
dd/mm/yyyy hh:mm
[-5 ~ +5]
[enabled], [disabled]
[enabled], [disabled]
20
Default settings
105%
Auto detection
0 EBM
4A
disabled
bypass
enabled
enabled
01/01/2020 00:00
[0]
disabled
disabled