Herunterladen Inhalt Inhalt Diese Seite drucken

Kärcher MC 250 Betriebsanleitung Seite 29

Vorschau ausblenden Andere Handbücher für MC 250:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
Rear support
2
Locking button (4x)
3
Crank
4
15.Caution: Before the supports are pushed in, all 4 lock-
ing buttons (scope of delivery of the "Supports" attach-
ment kit) must be attached to the left front and rear as
well as right front and rear of the waste container, ad-
justed and secured with the lock nuts. See "Installing the
locking buttons" at the end of this chapter .
16.Push in the rear supports (left and right) all the way to
the end stop while pulling out the red retaining head. Re-
lease the locking button to lock. The locking pin engag-
es in the holes in the supports when locking. Check that
the supports are locked securely.
17.Attach and secure the front supports as already de-
scribed for the rear supports.
Note
The front supports are marked and only fit on the corre-
sponding side.
Figure: Variant A with 2 short locking pins
Rear locking pin, short
1
Spring pin
2
Figure: Variant B with long locking pin
Locking pin, long
1
Hexagon bolt
2
18.With variant A: Crank up the rear supports until the
locking pins at the rear can be pulled out.
19.To pull out the spring pin, first open the tailgate of the
waste container. The tailgate is available in 2 different
versions.
a Variant 1: The tailgate can be opened with a square
key.
b Variant 2: The tailgate is a screwed sheet metal part,
either remove the 4 screws or pull out the spring cotter
pin through the side opening.
20.Pull out the spring pin.
21.Pull out the short locking pins (left and right).
22.With variant B: Check that the long locking pin has al-
ready been pulled out completely, if so, no further action
is necessary.
Ball sockets
1
Waste container
2
Recycling water valve
3
23.Alternately crank up the supports at the front and rear
(left and right):
a Until the waste container is free above the ball sock-
ets.
b Until the recycling water valve is exposed.
c Make sure that the front of the waste container does
not press against the cab.
24.The waste container now stands free on the supports.
Symbolic illustration: Waste container on supports
Waste container
1
Rear supports (2x)
2
Note
Supports are identical
Left front support
3
Note
Support is marked for left
Right front support
4
Note
Support is marked for right
25.Drive the rear of the vehicle carefully out from under the
waste container.
English
29

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis