Clatronic ar 815 Bedienungsanleitung Seite 68

Loudness Function
‹
Press and hold BND/LOU/ENT (7) to activate the Loudness
function. LOUD ON is displayed. The Loudness function
enhances the bass frequencies.
‹
Press and hold BND/LOU/ENT (7) again to deactivate the
Loudness function. LOUD OFF is displayed.
Sound Settings
‹
EQ (12) to cycle through the settings FLAT,
Repeatedly press
CLASSICS, POP M, ROCK M and DSP OFF. The selected
setting is displayed.
Display Information
‹
Repeatedly press DSP (10) to cycle through the following
display information:
Station, current time (automatic setting with RDS reception),
frequency of current station, file information (only during MP3
or WMA file playback), PTY of current station.
NOTE
►
If no information is available
displayed.
Reset Radio
To reset the unit to default settings press RESET (4) with a pointed
object, i.e. pen.
Reset the unit when:
■
using it the first time after all cabling is done,
■
malfunctions of buttons occur,
■
error messages are displayed.
Radio Functions
Set RADIO Mode
‹
Repeatedly press MODE (21) until frequency and band are
displayed.
Select Frequency Band
‹
Press BND/LOU/ENT (7) to toggle between FM1, FM2, FM3
and AM. The selected frequency band is displayed.
68
NO CLOCK or NO PTY is
Auto Search
‹
Press (26) or
is displayed. Search stops if a station is found.
Manual Search
‹
Press and hold (26) or
displayed.
‹
Press (26) or
frequency band in steps of 0.05 MHz and 9 kHz for AM until
the desired frequency is displayed.
After two seconds idling the unit returns to auto search. The display
shows AUTO.
Save Station
For each frequency band 6 station presets are available.
‹
Press and hold the desired numeric button (17) to save the
current station. Successful saving is confirmed with 2 beep
tones (except setting to BEEP OFF).
Access Saved Station
‹
Press BND/LOU/ENT (7) to select the desired frequency
band.
‹
Press one of the numeric buttons (17) to access the respective
station.
Auto Save
‹
Press BND/LOU/ENT (7) to select the desired frequency
band.
‹
AS/PS/D-AUD (22). SEARCH is displayed.
Press and hold
The unit starts automatic search. After one cycle the 6 stron-
gest stations are saved and all presets are played in sequence
for 5 seconds. The respective preset flashes.
‹
Press one of the numeric buttons (17) to access the respective
station.
Cycle Through Saved Stations
‹
Press AS/PS/D-AUD (22). All stations are briefly played in
sequence.
‹
AS/PS/D-AUD (22) when the desired station comes
Press
up. This station stays tuned into.
(27) to start auto search, SEARCH
(27) until MANUAL is
(27) to step through the FM