Herunterladen Diese Seite drucken

Scan Function - Clatronic ar 638 Bedienungsanleitung

Autoradio mit cd-player

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 4
If you would like to search for more stations in the FM band, press the BND
GB
button in order to change to the FM 2 or FM 3 band. Press the A.P button
again for more than one second in order to start the continued search.
b) Scan Function:
After the A.P button has been pressed briefl y the radio plays all the pre-set
stations in the current frequency band for a short time.
Note: The scan function ends automatically when it reaches the storage locati-
on from which it started.
A.P button as a search function during MP3 playback:
If the corresponding data were created when a CD was made in MP3 format,
these can be searched for using the following functions.
a) Direct input of the track number for CDs in MP3 format:
1. Press the A.P button once. The letters „MP3 T000" appear in the
display. The hundreds column fl ashes.
2. With the help of the +/- buttons it is now possible to enter a track
number from 0 to 9 in the hundreds column.
3. Press the SEL button once. The tens column fl ashes. Please continue
as described under section 2.
4. Press the SEL button again briefl y in order to enter a fi gure in the units
column.
5. The input of the track number is completed by pressing the SEL button.
Immediately after this the selected track is played.
b) Keyword search function for CDs in MP3 format:
1. Press the A.P button twice. The letters „A - -" appear in the display. If a
track or a folder with this letter is found, the track is shown in the right
of the display (if the CD contains ID3 tag information).
2. By repeatedly pressing the +/- buttons you can now enter a letter from A
to Z or a number from 0 to 9 in the first position of the display.
3. Within an initial letter you can also use the SKIP buttons 7/8 to search
through all tracks which begin with this letter (depending on the medi-
um).
4. Complete the input by pressing the SEL button. Immediately after this
the selected track is played.
c) Folder selection for CDs in MP3 format:
1. Press the A.P button three times. The fi rst folder selected appears in
the display.
2. Using the +/- buttons it is now possible to select the various directories
on the CD.
3. With the SKIP buttons 7/8 you can also select a track within a folder.
Confi rm the selection by pressing the SEL button.
4. If the SEL button is pressed the selected folder is played back from the
fi rst track on.
Note: It is not possible to guarantee that CDs created by the user can be play-
ed back due to the large variety of software and CD media available.
58
05-AR 638 New 58
31.08.2005, 8:48:36 Uhr

Quicklinks ausblenden:

Werbung

Kapitel

loading