Clatronic ar 638 Bedienungsanleitung Seite 56

GB
1. REL Button
Press the REL button to remove the front operating panel.
2. +/- Button
During normal playback these buttons are used to set the volume.
After the SEL button has been pressed it is possible to make changes in the
various menus, e.g. under FADER or BALANCE.
3. SEL Button (Select)
a) Press the SEL button briefl y to access the sound mode selection menu.
The letters „VOL" appear in the display for setting the volume. By repeated-
ly pressing the SEL button you can now select the individual menu items
such as VOL (Volume), BAS (Bass), TRE (Treble), BAL L - - R (Balance)
and FAD F - - R (Fade). The settings of the individual menu items are
changed using the „+" or „-" button.
Note: If equaliser settings such as POP and ROCK have been selected
under DSP it is not possible to adjust the BASS and TREBLE.
b) Press the SEL button for a longer time to access the selection menu:
• BEEP 2ND / BEEP ALL / BEEP OFF
• SEEK 1 / SEEK 2
• DSP OFF / FLAT / POP M / CLASSICS / ROCK
• VOL LAST / ADJ
Repeatedly pressing of the SEL button now brings up the individual menu
items. The settings of the individual menu items are changed using the „+"
or „-" button.
• BEEP 2ND/BEEP ALL/BEEP OFF (Confi rmation Beep)
You can select three different types of confi rmation beep when a key is
pressed.
BEEP 2ND:
BEEP ALL:
BEEP OFF:
• SEEK 1, SEEK 2 (only available during radio operation)
Seek function with the I
SEEK 1:
SEEK 2:
56
05-AR 638 New 56
Operation
The confi rmation beep is heard when a key is held down.
The confi rmation beep is heard whenever a button is
pressed.
The confi rmation beep is switched off.
/ I buttons during radio operation.
Keep the I / I buttons pressed down and the radio will
stop at the next station that is reached.
As long as the I /
search function will continue in the frequency band.
I buttons are pressed down the
31.08.2005, 8:48:35 Uhr