Ossur Flex-Run Junior Gebrauchsanweisung Seite 6

Female Pyramid Adapter Set Screw torque is 15 Nm.
Flex-Run Large is compatible with Össur 4-hole adapters.
Attaching adapters (Cheetah Xceed)
Cheetah Xceed is compatible with Össur 4-hole adapters. The device
should only be used with adapters with weight limit of 166 kg.
Nike Soles
The device can be fitted with a Nike spike pad or Nike sole. Refer to
instructions for relevant sole/pad for assembly instructions.
ALIGNMENT
Bench Alignment
Sagittal plane
1. Put the ground contact point of the foot module in front of the
alignment reference line according to dimension X (Figure 1) in the
table below.
2. Find the applicable socket flexion.
Coronal plane
1. Set the applicable socket abduction/adduction
2. Set for up to 5° of external rotation.
3. Set the correct height - see Compression in table below to
compensate for vertical compression.
Device
Flex-Run Junior
Flex-Run
Cheetah Xceed
Dynamic Alignment
Physical ability and the length of residual limb will have an effect on
alignment. Optimal alignment reduces energy expenditure, and reduces
muscle and ligament strain.
Adjust alignment to improve gait symmetry.
The A-P alignment and vertical deflection from socket to foot can have an
effect on stride length.
USAGE
Troubleshooting
Make sure socket fit and suspension are optimal. Examine running
symmetry at patient's preferred running speed.
If the duration of loading the prosthesis is longer compared to the
contralateral side:
• The foot module is too soft
• The prosthesis is too short
• The foot is aligned too far anteriorly
If the duration of loading the prosthesis is shorter compared to the
contralateral side:
• The foot module is too stiff
• The prosthesis is too long
• The foot is aligned too far posteriorly.
6
Dimension X
25-40 mm
25-40 mm
50-60 mm
Compression
10-20 mm
30-40 mm
30-40 mm