Clatronic AR 557 CD Bedienungsanleitung Seite 44

5....-05-AR 557 CD_3
EONTA LOCAL:
GB
This function prevents switching to an EON station whose signal is too
weak. The radio does not switch to this station and the listener does not
hear any interference.
EONTA DISTANCE Mode:
In this mode the EONTA circuitry tries to receive the EONTA information
from any available transmitter and thus improve reception quality.
• VOL LAST/VOL ADJ
VOL LAST:
VOL ADJ:
4 POWER Button
Press this button to switch the device on and off.
5 LCD (liquid crystal display)
6 BAND buttons
Press the BAND button briefly to select the frequency band you would like to
hear. The designation of the corresponding band F1, F2, F3, MW, LW is shown
in the LCD.
7/8 / Buttons TUNING, SEEK, TRACK, SKIP UP/DOWN
a) In radio mode:
Press the
Press the
search for a radio station with a strong signal level.
See also the function SEEK 1 / SEEK 2.
b) In CD mode: Press the
wards. If you would like to scroll the titles of the tracks keep the
arrow button pressed.
9 REL Button
Press the REL button if you want to remove the front control panel to take it
with you.
10 Mode Button
Press this button to select the CD player or radio mode.
11 MUTE Button
Press the MUTE button to switch off the loudspeakers for a short time. Press
this button again to cancel this function.
12 AP Button (Autostore - Automatic Station Storage)
In radio mode:
a) Memory function :
Press the AST button for longer than one second to activate automatic
station storage. The radio searches within the current frequency band, e.g.
44
14.10.2003 9:53 Uhr
The radio switches on at the actual volume it had when it
was last switched off.
Using the + and - buttons you can pre-select a constant
switch-on volume.
or button briefly to tune into a radio station manually.
or button for more than one second to start the automatic
or button briefly to jump forwards or back-
Seite 44
or