Hot Surfaces; Installation And Maintenance; Type Plate - Nicotra Gebhardt RLM E3 Betriebsanleitung

BA-REF 6.2 - 05/2021

4.6.4. Hot Surfaces

4.9.1. Type Plate

Fig 4-1:
Example type plate
Fig 4-2:
Arrow indicating direction
of rotation
EN-8/26
There is a risk of sustaining burns or scalds on hot surfaces during
operation.
 Do not touch the motor during operation
 When the roof fan has stopped wait until the motor has cooled
down
 Wear protective gloves
4.7. Structural Modifications, Spare Parts
Note Unauthorised structural modifications may not be made to the roof
fan without the consent of Nicotra Gebhardt GmbH. Nicotra Gebhardt
GmbH shall not accept liability for any damage arising as a result of
said modifications. Use only genuine spare parts supplied by Nicotra
Gebhardt GmbH.

4.8. Installation and Maintenance

 The following steps should be taken before working on the roof fan:
- Switch off the machine and take measures to prevent it from being
switched back on accidentally.
Display the following message on a sign:
-
Do not switch on! Work currently in progress on the machine
4.9. Signs on the Roof Fan
Depending on the model, the type plate and the arrow indicating the
direction of rotation are fitted to the housing or handle for high visibility.
Example only!
4.9.2 Arrow Indicating Direction of Rotation
English