Safety; Product Safety; Safety Instructions; Safety Devices - Nicotra Gebhardt RLM E3 Betriebsanleitung

BA-REF 6.2 - 05/2021
DANGER
CAUTION
EN-6/26

4. Safety

4.1. Product Safety

The fans offer a high degree of operational safety and high quality
standards guaranteed by a certified Quality Management System (EN ISO
9001).
Before leaving the factory all the fans are inspected and sealed with a
mark of conformity.
Nevertheless, when operating roof fans supplied by Nicotra Gebhardt
GmbH there can be a risk of death or injury for the user or third parties,
and a risk of damage to the roof fan or other material assets.
 Only use roof fans in perfect working order and as intended, having
due regard for safety, an awareness of hazards and in due
compliance with the operating instructions.
 Arrange immediate repair of any faults which could compromise
safety.
The roof extract fans are delivered without inlet guards. If there is a
danger of contact with the impeller owing to the way the fan is
installed, then it is necessary to fit an inlet guard conforming to DIN
EN ISO 13857 (available as an accessory).
Only then the roof fan can be set in operation!

4.2. Safety Instructions

 The roof fan may only be commissioned, operated and serviced in
compliance with the following instructions:
− Operating instructions
− Warning and information signs on roof fan
− Any other operating and installation instructions pertaining to the
machine
− Terms and requirements relevant to the machine
− Applicable national and regional regulations, especially regarding
health & safety and accident prevention.

4.3. Safety Devices

 Use appropriate safeguards to prevent contact with rotating parts
(shafts, impeller, etc.).
 After installation (and before electrical connection) immediately refit
any guards which have been removed during installation.
The suitability of protection devices and their fixtures to the fan have
to be evaluated within the complete security concept of the
installation.
English