Herunterladen Inhalt Inhalt Diese Seite drucken

Safety Instructions - cecotec READY WARM 8200 BLADELESS Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 23
especificaciones técnicas.
Cambie siempre todas las pilas a la vez. No utilice pilas de
diferente tipo o capacidad.
Fíjese en la polaridad a la hora de reemplazar las pilas (+/-).
Retire las pilas del dispositivo cuando estén descargadas o
cuando el producto no vaya a ser utilizada en un tiempo.
Las pilas no deben ser recargadas, peladas, tiradas al fuego ni
cortocircuitadas.

SAFETY INSTRUCTIONS

Read these instructions thoroughly before using the appliance.
Keep this instruction manual for future reference or new users.
Make sure that the mains voltage matches the voltage stated
on the rating label of the appliance and that the wall outlet is
grounded.
Do not cover the air inlet or outlet openings while the appliance
is operating. Keep a minimum distance of 0.5 m from the
appliance to any object or wall on each side, front and back.
Do not allow any object to enter the ventilation or exhaust
opening as this may cause electric shock, fire, or damage to the
heater.
Do not use the device in dusty environments.
Do not place the appliance close to heat sources, flammable
substances, wet surfaces where it can fall or be pushed into
water or allow it to come into contact with water or other
liquids.
The product's surface might reach high temperatures during
operation. Hold the heater only by the handle in order to move it.
Do not reach for an appliance that has fallen into water, unplug
immediately.
Check the power cord regularly for visible damage. If the cord is
6
READY WARM 8200 BLADELESS/8400 BLADELESS CONNECTED
damaged, it must be replaced by the official Technical Support
Service of Cecotec in order to avoid any type of danger.
This appliance is intended for household use only. Do not use
for industrial or commercial purposes.
Do not allow the cord to come into contact with hot surfaces.
Do not attempt to repair, disassemble or modify the appliance.
This unit contains no user-serviceable parts.
Do not use the appliance to dry clothes or leave it unattended
during operation.
Do not insert or allow objects to enter any air inlet or outlet,
as this may cause an electric shock, fire or damage to the
appliance.
Do not immerse the cord, plug, or any non-removable part
of the appliance in water or any other liquid, nor expose the
electrical connections to water. Make sure your hands are dry
before handling the plug or switching on the appliance.
The appliance must not be located immediately below a socket-
outlet.
This appliance is not intended for use in bathrooms or similar
locations which may be exposed to water, moisture or humidity.
Always turn off and unplug the appliance when not in use and
before moving it to a new location. Pull from the plug, not the
cord, to disconnect it from the outlet.
Avoid the use of an extension cord as this may overheat and
cause a risk of fire.
This appliance has hot and arching or sparking parts inside.
Do not use it in areas where gasoline, paint, or any flammable
liquids are used or stored.
This appliance is not intended for use in bathrooms, laundry
areas and similar humid locations. Never locate this appliance
where it may fall into a bathtub or otherwise become exposed
to water.
READY WARM 8200 BLADELESS/8400 BLADELESS CONNECTED
7

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Ready warm 8400 bladeless connected

Inhaltsverzeichnis