Cleaning And Maintenance; Technical Specifications; Disposal Of Old Electrical Appliances - cecotec READY WARM 8200 BLADELESS Bedienungsanleitung

ENGLISH
Turn over the remote and press tab A to the right.
Slide out the battery tray B.
Replace the battery with the same type, ensuring the positive side is facing upwards.
Mobile App
(Available only for 05371 ReadyWarm 8400 Bladeless Connected)
In order to link your product to our App, please follow the below steps:
Download the EnergySilence App from Google Play or App Store.
If this is your first time using the App, you'll need to create an account, otherwise sign in.
Once you have entered the App, click on the "+" in the upper right corner and tap "ReadyWarm
Bladeless".
Hold down the On/off button until it beeps and the LED light above the button blinks quickly.
Enter your Wi-Fi's password and press "confirm". Remember that the Wi-Fi network must be
2.4 GHz.
Once these steps are done, the linking process will start automatically.
If the automatic linking process fails, press the On/Off button again until it beeps and the LED
light slowly blinks.
Then , enter the Wi-Fi password again and confirm.
Follow the steps indicated on the App to complete the manual linking process.

4. CLEANING AND MAINTENANCE

Always turn off, unplug and allow the appliance to cool down before cleaning.
Do not use abrasive scouring pads, powders or cleaners to clean the product.
Use a soft, dampened and clean cloth to clean the product's outer housing. Be careful not to
touch the heating elements.
A common cause of overheating is deposits of dust or fluff in the appliance. Ensure these
deposits are cleared regularly by vacuum-cleaning air vents and grilles.
If the heater is not going to be operated for a long period of time, store it in a dry and safe place
where it is protected from dust.
36
READY WARM 8200 BLADELESS/8400 BLADELESS CONNECTED
5. TROUBLESHOOTING
Problem Possible cause
No power Power cord is not plugged in.
There is no power from socket.
The power switch on the rear of
the unit is turned off.
Odour emission New unit. When the unit is used
from unit for the first time the fan motor
may produce and odour which will
dissipate within a week of use.
Strong Unit is not placed on a flat surface.
vibrations Unit may be damaged.
and noise

6. TECHNICAL SPECIFICATIONS

Model: ReadyWarm 8200 Bladeless
Product reference: 05370
Power: 1500 W
220-240 V~/50-60 Hz
Model: ReadyWarm 8400 Bladeless Connected
Product reference: 05371
Power: 1500 W
220-240 V~/50-60 Hz

7. DISPOSAL OF OLD ELECTRICAL APPLIANCES

The European directive 2012/19/EU on Waste Electrical and Electronic
READY WARM 8200 BLADELESS/8400 BLADELESS CONNECTED
ENGLISH
Solution
Connect the power cord.
Check socket operates properly.
Ensure the power switch on the rear of the
unit is in the On position.
No action required.
Place on a flat surface. Place an anti-
vibration mat underneath.
If the heater is damaged discontinue use
and contact the Technical Support Service
of Cecotec.
37