Safety Instructions; Before Use - cecotec Ready Warm 3000 Now Bedienungsanleitung

ENGLISH

2. SAFETY INSTRUCTIONS

Read these instructions thoroughly before using the appliance. Keep this instruction manual
for future reference or new users.
• Make sure that the mains voltage matches the voltage stated on the rating label of the
appliance and that the wall outlet is grounded.
• Do not place the appliance immediately below a power socket.
• Avoid the use of an extension cord as this may overheat and cause a risk of fire.
• Check the power cord regularly for visible damage. If the cord is damaged, it must be
replaced by the official Technical Support Service of Cecotec in order to avoid any type of
danger.
• Do not introduce or allow objects to pass through the protection grid, as it may cause risk
of electric shock, fire or product damage.
• Do not cover the appliance during operation.
• The product's surface will reach high temperatures during operation. Do not touch with
the hands or cover it to avoid overheating.
• Do not place the appliance close to heat sources, flammable substances, wet surfaces
where it can fall or be pushed into water or allow it to come into contact with water or
other liquids. Do not operate outdoors.
• Do not operate the appliance if it does not work properly.
• The appliance is not intended to be used by children under the age of 8. It can be used by
children over the age of 8, as long as they are given continuous supervision.
• This appliance can be used by children aged 8 and above, and persons with reduced
physical, sensory or mental capabilities or lack of experience and knowledge, as long as
they have been given supervision or instruction concerning the use of the appliance in a
safe way and understand the hazards involved. Children shall not play with the appliance.
• Supervise young children to make sure that they do not play with the appliance. Close
supervision is necessary when the appliance is being used by or near children.

3. BEFORE USE

1. Take the product out of the box and remove any packaging materials.
2. Check for any visible damage, if any is observed, contact as soon as possible the Technical
Support Service of Cecotec for advice or reparation.
3. Place the heater on a flat and stable surface.
10 READY WARM 3000 NOW
05321_Ready Warm 3000 Now_manual_EA.indd 10 19/7/18 10:16