Installation; Main Menu; Run; Select + Run Program - VWR Peqlab Primus 25 advanced Bedienungsanleitung

All manuals and user guides at all-guides.com
Instruction manual Primus 25 advanced®

4 INSTALLATION

Before using the Primus 25 advanced® for the first time, check the voltage range and be certain it cor-
responds to your power supply.
Place your Primus 25 advanced® in an adequate position in the lab. The unit should always be sur-
rounded by at least 25 cm of free space to ensure proper cooling. Place several units beside each other,
not behind each other.
Please avoid running the Primus cycler without having tubes placed inside the block.

5 MAIN MENU

The software for the Primus 25 advanced® is designed for simple and intuitive use. Generally, the ar-
row keys are used to move the cursor on the display screen. Text is entered using the alphanumeric key
pad. The position of a letter on the key tells how many times the key must be pressed (in rapid sequence)
to obtain that letter. Use the Run/Enter key to access the various function menus, and the Stop/Esc key
to exit the function menus and return to the main menu.
When switching on the instrument, the screen first displays an initialization routine, then the main menu
appears from which all other functions of the Primus 25 advanced® are accessible.

5.1 RUN

To start the last run program select RUN. The program starts immediately.
Attention: The modifications in the program after the last run will be ignored. In this case, select the pro-
gram with SELECT + RUN PROGRAM and press enter to start.
Programs can be interrupted at any time during a run with the Stop/Esc key. Follow the instructions on
the display.

5.2 SELECT + RUN PROGRAM

To run a previously stored program select SELECT + RUN PROGRAM. A list of all stored programs (up
to 90) is displayed. Select the desired program with the arrow keys, or enter the program number di-
rectly. Press enter to start. Before each run, a user name may be entered via the alphanumeric key pad.
At this point you can decide whether a GLP report shall be printed via the parallel printer interface (GLP
ONLINE PRINTS; GLP = Good Laboratory Practice). Switch between YES und NO with the () cursor
keys. A predicted program run time will be displayed before the start.
Programs can be interrupted at any time during a run with the Stop/Esc key. Follow the instructions on
the display.
PEQLAB_v0314_E
4