Package Contents; Installation; Intended Use; Symbols And Conventions - VWR Micro1207 Bedienungsanleitung

Package Contents

Centrifuge
Power Supply with cord(s)
12 x 1.5ml rotor
Operation manual
Purchase registration card

Installation

1. Remove unit from packaging; verify all package contents are included.
2. Locate the centrifuge at least 300mm from the all edges of the lab bench.
3. Connect the centrifuge to the power supply first and then plug the wall
transformer/power supply into the wall AC outlet.
4. A soft beep can be heard as the microcentrifuge powers up. Factory default settings
will be displayed on the front panel. NOTE: If the lid latch does not release after
power up, press the RED stop button.

Intended use

This product is intended for indoor use only. Applications include microfiltration, mini or quick
spin columns, small volume pelleting of cells in liquid culture, quick spin downs, and low speed
sedimentation
.

Symbols and conventions

The following chart is an illustrated glossary of the symbols that are used in this manual.
CAUTION This symbol indicates a potential risk and alerts you to
proceed with caution

Product Specifications

- Maximum speed:
- Maximum capacity:
- Timer:
- Dimensions:
- Ambient operating temperature:
- Operating humidity:
- The weight of the centrifuge, with rotor and cover:
Electrical:
-
Instruction for Use
This microcentrifuge has been carefully designed and constructed for easy operation and
proven durability. Digital displays, quiet operation, simple controls, autoclavable rotors and
rotor covers are a few of this microcentrifuge's features
1
1
1
1
1
10,000 rpm / 7,200 x g
12 x 1.5/2.0ml
99 minutes
19.7 x 17.8 x 12.7 cm (7.75 x 7 x 5 in)
4º to 40ºC
0% to 95% humidity, non-condensing.
1.5 kg (3.25 pounds)
100 VAC~,115 VAC~, 220 VAC~ (Input)
50/60 Hz (Input)
24 VDC, 2.4A (Output)
Max: 50W