Operating The Device Safely - Dometic RF Serie Bedienungsanleitung

RF60, RF62
2.2 Placing and connecting the device safely
!
WARNING! Failure to obey these warnings could result in death
or serious injury.
Fire hazard
• Ensure that the device circuit is not damaged during transportation.
• When positioning the device, ensure the supply cord is not trapped or
damaged.
• Do not locate multiple portable socket-outlets or portable power
supplies at the rear of the device.
A
NOTICE! Damage hazard
• Risk of overheating!
Always ensure sufficient ventilation so that the heat generated during
operation can dissipate. Make sure that the device is sufficiently far
away from walls and other objects so that the air can circulate.
• To enable the refrigerant to circulate properly, the device may not
tilted by more than 3°. Use a spirit level to make sure the device is
level.
• Only hold the device at the body of the device during transport. Never
hold the device at the absorber unit, the cooling fins, the gas pipes,
the door or the control panel.
• Do not place the device near naked flames or other heat sources (heat-
ers, direct sunlight, gas ovens etc.).
• Only use the AC connection cable supplied to connect the device to
the AC mains.
• Ask your vehicle manufacturer if the battery management of your
vehicle shuts down the devices to protect the battery.
• Put the device door and the freezer door into the winter position if you
are not going to use the device for a longer period of time. This pre-
vents mold from forming.
2.3

Operating the device safely

!
WARNING! Failure to obey these warnings could result in death
or serious injury.
Electrocution hazard
• Before starting the device, ensure that the power supply line and the
plug are dry.
EN
Safety instructions
15