Parts And Components; Before Use - cecotec TXULETACO 8000 INFERNO Bedienungsanleitung

sufficient room ventilation and do not leave the appliance
unattended until it has cooled down completely.

2. PARTS AND COMPONENTS

Fig. 1.
Fig. 2.
1.
Main body
2.
Grill grate guides
3. M4×10 screws
4. Handle
5. Grill rack
6. Pizza shovel
7.
Pizza stone
8.
Fat-drip tray x2
9. Time knob
10. Display
11. Temperature knob
12. Power cord
13. Power switch
14. Tongs

3. BEFORE USE

Take the product out of the box.
Remove all packaging materials. Keep the original box and padding in case it is needed for
transportation.
Remove the rest of the accessories from the inside of the device.
Make sure all the components are included and in good conditions, otherwise, contact
immediately the official Technical Support Service of Cecotec.
Clean the appliance and its components before first use.
Operate the appliance with no food for 10 minutes in a well-ventilated room, with the grate
and fat drip tray.
Clean the device and its components again.
Clean all of the accessories in warm water. Dry the parts thoroughly.
Use a damp cloth to clean the outside and inside of the device and dry.
Connect the device to a power supply.
Note: Smoke might be observed during first use due to residual wastes from manufacture.
03062_Txuletaco 8000 Inferno_Manual_YV01191213.indd 19 03062_Txuletaco 8000 Inferno_Manual_YV01191213.indd 19
TXULETACO 8000 INFERNO / 8800 INFERNO STEEL
ENGLISH
19
13/12/19 12:10 13/12/19 12:10