Parts And Components; Before Use; Operation - cecotec Rock'nGrill Multi 2400 UltraRapid Bedienungsanleitung

2. PARTS AND COMPONENTS

1. Left lift lever
2. Handle
3. Upper housing
4. Right lift lever
5. 180º opening button
6. Handle lock
7. Bottom housing
8. Non-stick plate
9. Ready light indicator
10. Power light indicator
11. Thermostat knob

3. BEFORE USE

• Take the product out of the box.
• Remove all packaging materials. Keep the original box.
• Make sure all the components are included and in good conditions, otherwise,
contact immediately the official Technical Support Service of Cecotec.
• Clean the plates with a soft, dampened cloth.
• Dry thoroughly all parts of the device with a cloth or paper towel.
• For best results, lightly coat the cooking plates with a little cooking oil or cooking
spray.
Warning: A slight odour and smoke might appear when heating the device for the first time.
This is due to manufacturing materials residues and does not affect the appliance's operating.

4. OPERATION

Preparing your grill
• Close the grill and connect the plug to a power supply. The light indicators will turn on red,
indicating the device is now turned on.
• Turn the thermostat knob to select the desired temperature. Set it at "MIN" for light-
coloured results and "MAX" for darker ones. The ready light indicator will turn on indicating
the device has started preheating.
Warning: It is suggested to turn the knob all the way to the maximum setting, and then adjust
temperature depending on the type of food.
03066_Rock'nGrill Multi 2400 UltraRapid_Manual_SA.indd 13
3
1
8
11
9 10
ROCK'NGRILL MULTI 2400 ULTRARAPID
ENGLISH
5
6
4
7
2
13
9/8/19 16:00