Herunterladen Inhalt Inhalt Diese Seite drucken

Comet FDX 1001 Bedienungs- Und Wartungsanleitung Seite 22

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 57
- press the spray gun (24) lever (22), so as to release any residual pressure;
- have a Specialized Technician check the high pressure cleaner because the device has to be reset
manually and to do this it is necessary to access the inside of the electrical panel.
• Pressure unloader/regulation valve.
Valve, suitably calibrated by the Manufacturer, for regulating work pressure by means of the knob (8)
and that allows the pumped fluid to return to pump suction thus preventing the onset of dangerous
pressures, when closing the spray gun or when trying to set a pressure that is above the maximum
permitted values.
• Spray gun lever lock device.
Safety stop (23) for locking the spray gun (24) lever (22) in the closed position so it cannot be started
accidentally (Fig. 4, position S).
• Emergency push button (XTREME).
Following a condition of danger, pressing push button (40) stops the machine immediately.
Remember that the push button stays down mechanically: to restart the machine proceed as explained
in the "Operation" paragraph.
WARNING
• When the emergency push button (40) is pressed, lever (22) on the high pressure cleaner must be pressed
immediately after to discharge any residual pressure.
• Relief valve (XTREME).
Maximum pressure valve (41), adequately calibrated, discharges any excess pressure in the case of a
malfunction in the pressure regulating system.
Make sure the following are inside the pack of the product you have purchased:
• high pressure cleaner;
• high pressure delivery hose;
• spray gun;
• lance hose;
• bag of accessories with:
- instruction manual - safety precautions;
- instruction manual - operation and maintenance;
- declaration of conformity;
- suction kit with: fitting, gasket and clamp;
- nozzle cleaning pin.
If any problems arise please contact your dealer or an authorised assistance centre.
You can add the following range of accessories to the standard ones supplied with your high pressure
cleaner:
• sandblasting lance: designed to smooth surfaces, removing rust, paint, encrustations, etc.;
• drain cleaning kit: designed to unclog pipes and ducts;
• different types of lances and nozzles;
• rotating brush: designed for cleaning fragile surfaces;
• rotating nozzle: designed for removing stubborn dirt;
• foam lance: designed for a more efficient distribution of the detergent;
• hose reel: to increase working range thanks to a longer hose and practical housing for it.
Please contact your dealer to know more about the complete accessory range.
22
STANDARD FITTING
OPTIONAL ACCESSORIES

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis