Inhaltsverzeichnis
Werbung
Package Contents
(1) Breeze Foot
(1) Foot Shell
(1) CPI Sock
(1) Cosmetic Attachment Plate (CAP)
This diagram is to help familiarize you with the unique parts of the Breeze. These parts are referenced in the
instructions and used when speaking with a technical service representative.
Key Components (Figure 1)
A. Integrated Pyramid
C. Foreheel
E. Foot Shell
G. Fasteners
Drain Hole (Figure 1F)
A thin area is located on the bottom of the EnviroShell
doffing the footshell and drilling or cutting a 1/4" (6mm) diameter hole in the designated location.
PRODUCT DESCRIPTION:
The prosthetic foot device is constructed with an integrated pyramid, housing, and composite foreheel.
The foreheel is secured to the housing with two fasteners.
INTENDED USE:
The Breeze is a prosthetic foot designed to replace one or more functions of the biologic human foot.
INDICATIONS:
▪ Lower limb amputations
PROTECTIVE COVER ON DOME
Remove the protective cover on dome after alignment is completed and before patient leaves clinic.
TECHNICAL SPECIFICATIONS
FOOT SIZE
WEIGHT LIMIT
21-25 cm
200 lbs / 100 kg
26-30 cm
275 lbs / 125 kg
*25cm foot with shell
Tools Recommended
(1) 4mm Hex Key
(1) Foot Horn
B. Housing
D. CPI Sock (not shown)
F. Thin Area
. Create a draining path for water by
®
CONTRAINDICATIONS:
▪ None known
BUILD HEIGHT
2.4 in / 6.2 cm
2.6 in / 6.5 cm
FOOT WEIGHT*
523 g
EN
Werbung
Inhaltsverzeichnis
