Inhaltsverzeichnis
Werbung
FIRMNESS CATEGORIES
EN
The Breeze is available in firmness category 3 only.
Note: Incorrect category selection may result in poor device function.
WEIGHT (LBS)
WEIGHT (KG)
SIZE CM
LOW IMPACT
MOUNTING
Use only high quality endoskeletal components.
ASSEMBLY AND DISASSEMBLY (for sock replacement)
Use the Foot Horn to don and doff the foot shell. Remove the CPI Sock and replace as needed.
Any further disassembly or modification of components will void the warranty.
STATIC ALIGNMENT (Figure 2)
For optimal function, balance the patient's weight evenly between the heel and toe.
▪ The Breeze was designed with a 3/8" (10 mm) heel rise.
▪ The load line divides the foot at 1/3 heel lever and 2/3 toe lever.
Note: Adjustments will need to be made if worn without shoes.
DYNAMIC ADJUSTMENTS
DESIRED RESULT
Firmer Toe Response
Softer Toe Response
Firmer Heel Response
Softer Heel Response
EXPOSURE TO MOISTURE
To maintain the lifespan of the Enviroshell and CPI sock, always dry foot thoroughly after exposure
to moisture. Rinse and dry if exposed to salt water or chlorinated water.
COSMETIC FINISHING
College Park does not recommend cosmetically finishing the prosthesis if it will be exposed
to moisture.
0-220
221-275
0-100
101-125
21-30
26-30
3
3
ALIGNMENT CHANGE
Plantarflex the Breeze or move load line posterior
Dorsiflex the Breeze or move load line anterior
Dorsiflex the Breeze or move load line anterior
Plantarflex the Breeze or move load line posterior
Werbung
Inhaltsverzeichnis
