Plu (Price Look-Up) And Subdepartment Programming - Sharp XE-A202 Bedienungsanleitung

A202_3 FOR THE MANAGER

PLU (Price Look-Up) and Subdepartment Programming

2
The PLU function allows speedy key entries whereby a price is automatically called up when a code is entered.
The subdepartment is a kind of "open PLU", which requires you to enter a price after the PLU code is entered.
By default, PLU/subdepartment setting for 1 through 200 codes are possible, and can extend to 1200. To
extend the number, please refer to "EJ memory type" on page 41.
Unit price and associated department assignment
PLU code
*1: To assign departments 17 through 32, press the department shift key.
When the associated department is department 33-50:
PLU code
*2: For a subdepartment, set the limit amount of unit price entry.
To program the following PLU code, start from entering a unit price or an associated department code without
pressing the
To program another PLU code, start from the beginning without pressing the
To delete a PLU code, use the following sequence:
Downloaded from: http://www.usersmanualguide.com/
03.7.5 8:08 AM Page 29
Key operation example
!
1000
A
If a department is not programmed to allow the entry of preset unit prices in functional
programming, the department is automatically changed to allow the entry of preset unit prices by
this programming entry.
To program zero
p 2
*
Unit price
(max. six digits)
p
Associated
dept. code
(33 to 50)
A
key.
Key operation example
p
1
#
125
A
PLU code
To delete the following PLU code
1
*
D
To program zero
d
2
* Unit price
(max. six digits)
PLU code
p v
To delete another PLU code
Print
Unit price
A
Associated
Dept. key
s
A
A
key.
Print
Unit price
Associated dept.
A
29