Override Entries; Correction After Finalizing Atransaction (Void Mode) - Sharp XE-A202 Bedienungsanleitung

A202_4 FOR THE MANAGER

OVERRIDE ENTRIES

Programmed limit for functions (such as for maximum amounts) can be overridden by making an entry in the
MGR mode.
REG mode
entries
Turn the mode switch
to the MGR position.
Return the mode switch
to the REG position.
CORRECTION AFTER FINALIZING A
TRANSACTION (Void mode)
When you need to void incorrect entries that clerks cannot correct (incorrect entries found after finalizing a
transaction or cannot be corrected by direct or indirect void), follow this procedure:
1.
Turn the mode switch to the
into the void mode.
2.
Repeat the entries that are recorded on an incorrect receipt. (All data on the
incorrect receipt is removed from register memory; the voided amounts are
added to the void mode transaction totalizer.)
62
Downloaded from: http://www.usersmanualguide.com/
03.7.5 8:10 AM Page 62
1.
Turn the mode switch to the MGR position.
2.
Make an override entry.
In this example, the register has been programmed not to allow
discounts entries over 1.00.
Key operation example
#
1500
-
250
...Error
l
-
250
A
position using the manager key (MA), to enter
Incorrect receipt
REG
OPX/Z
PGM
Print
REG
OPX/Z
MGR
PGM
Cancellation receipt
MGR
X1/Z1
X2/Z2
X1/Z1
X2/Z2