Plu (Price Look-Up) And Subdepartment Programming - Sharp XE-A301 Bedienungsanleitung

Key operation example
If a department is not programmed to allow the entry of preset unit prices in functional
programming, the department is automatically changed to allow the entry of preset unit prices by
this programming entry.

PLU (Price Look-Up) and Subdepartment Programming

2
The PLU function allows speedy key entries whereby a price is automatically called up when a code is entered.
The subdepartment is a kind of "open PLU", which requires you to enter a price after the PLU code is entered. A
maximum of 1800 PLU/subdepartment settings are possible. Each one belongs to a department and acquires
the department's parameters (tax status, SICS and entry digit limit).
The cash register is preprogrammed so all 1800 codes are assigned as positive PLUs associated with
department 1 and preset unit price "0".
Unit price and associated department assignment
p
PLU code
(1 to 1800)
*1: To assign departments 21 through 40, press the department shift key.
When the associated department is department 41-99:
p
PLU code
(1 to 1800)
*2: For a subdepartment, set the limit amount of unit price entry.
To program the following PLU code, start from entering a unit price or an associated department code without
A
pressing the key.
To program another PLU code, start from the beginning without pressing the
Key operation example
To delete a PLU code, use the following sequence:
30
¡
1000
A
To program zero
2
*
Unit price
(max. six digits)
d
Associated
dept. code
(41 to 99)
p
1
™
125
A
p
PLU code
To delete the following PLU code
To delete another PLU code
Print
1
*
D
Associated
Dept. key
To program zero
s
2
* Unit price
(max. six digits)
A
Print
PLU code
v A
Unit price
A
A
key.
Unit price
Associated dept.