Advanced Function Programming; Register Number And Consecutive Number Programming - Sharp XE-A202 Bedienungsanleitung

A202_3 FOR THE MANAGER
Training mode text
For every receipts issued in the training mode, **TRAINING** is printed by default. When you want to change
the text, follow the procedure below.

ADVANCED FUNCTION PROGRAMMING

Register Number and Consecutive Number Programming

1
The register number and consecutive numbers are printed on every receipt or journal.
When your store has two or more registers, it is practical to set separate register numbers for identification. The
consecutive number is increased by one each time a receipt is issued or when a journal print occurs.
For consecutive number programming, enter a number (max. 4 digits) that is one less than the desired starting
number.
Register number
s
Setting consecutive numbers
s
40
Downloaded from: http://www.usersmanualguide.com/
03.7.5 8:08 AM
(12 digits)
s 87
Key operation example
s P
87
S S S S
TRAINING
s A
The programmed text is printed in double-size characters on the receipts issued in the training
mode.
1 @
Key operation example
s @
1
s A
123456
2 @
Key operation example
s @
2
s A
1000
Page 40
To keep the current setting
P Character keys
(max. 12 digits)
To set the register number "0"
Register number (one to six digits)
To begin the count from 0001
A number (one to four digits) that is one
less than the desired starting number
s A
Print
s A
Print
Register number
s
Print
Consecutive
number
A