Rommelsbacher EKS 2000 Bedienungsanleitung Seite 34

• Attention: Make sure that the holes in the nozzle are always clean and not clogged.
• Attention: For moving the nozzle, only touch it at the upper plastic part.
• Attention: After frothing, the system must be cooled manually (see steps 12 – 15).
Warning: Casing, brew head,
portafi lter, fi lter inserts and hot
water/steam nozzle are getting hot
during use!
Step 4:
Choose the function "steam".
Step 8:
Remove the vessel.
34
• Check the water tank
regularly, refi ll water if
necessary.
• Check the drip pan
regularly, empty it if
necessary.
Step 1:
Prepare the appliance.
Step 5:
Switch the appliance on.
The appliance heats up and the pilot
lamp blinks. When the lamp glows
permanently, the appliance is ready
for use.
Step 9:
For frothing milk, dip the nozzle in
the pot with milk.
Step 2:
Position the portafi lter without fi lter
insert at the marking of the brew
head and lock it by turning it to the
right as far as it will go.
Step 6:
Start steam supply.
Turn the rotary knob to the right.
Produce steam for 2 - 3 seconds
to remove residual water from the
system.
Step 10:
Start steam supply.
Turn the rotary knob to the right.
Step 3:
Place a vessel below the outlet of
the hot water/steam nozzle.
Step 7:
Stop steam supply.
Turn the rotary knob to the left.
Step 11:
Stop steam supply.
Turn the rotary knob to the left.