JVC kd-lh70r Bedienungsanleitung Seite 40

This operation is only possible when using
JVC MP3-compatible CD changer
(CH-X1500).
To go to a track/file quickly
(+10 and –10 buttons)
1
Press M (MODE) to enter the functions mode
while playing a disc.
"MODE" flashes on the upper
part of the display.
2
Press +10 or –10.
* The first time you press +10 or –10 button,
the track/file skips to the nearest higher or
lower track/file with a track/file number of
multiple ten (ex. 10th, 20th, 30th).
Then, each time you press the button, you can
skip 10 tracks/files (see "How to use the +10
and –10 buttons" below).
• After the last track/file, the first track/file will
be selected, and vice versa.
Note:
If the current playing disc is an MP3 disc, files are
skipped within the same folder.
How to use the +10 and –10 buttons
• Ex. 1: To select track/file number 32 while
playing track/file number 6
(Three times)
\ 10 \ 20 \ 30 \ 31 \ 32
Track/File 6
• Ex. 2: To select track/file number 8 while
playing track/file number 36
(Three times)
Track/File 36 \ 30 \ 20 \ 10
40
To skip 10 tracks/files*
forwards to the last track/file
To skip 10 tracks/files*
backwards to the first
track/file
(Twice)
(Twice)
\ 9 \ 8
To skip to the next or previous folder
(only for MP3 discs)
Press 5 (up) while playing an
MP3 disc, to go to the next
folder.
Each time you press the
button consecutively, the next
folder is located, and the first
file in the folder starts
playback.
Press ∞ (down) while playing an MP3 disc, to
go to the previous folder.
Each time you press the button consecutively,
the previous folder is located, and the first file
in the folder starts playback.
To show the disc information for CD Text
and MP3 discs
This is possible only when connecting a JVC CD
changer equipped with CD Text and/or MP3 disc
information reading capability.
Select text display mode while playing a
CD Text or an MP3 disc.
• For details, see page 23 about CD Text disc
information and page 27 about MP3 disc
information.