Maintenance And Cleaning - Parkside PNKP 105 B1 Originalbetriebsanleitung

Preparing the surfaces to be glued
♦ Pull the trigger 3 to regulate the flow of glue in accordance with
your requirements .
1 . Apply the glue in spots . For flexible materials, such as textiles,
apply the glue in zigzag lines .
2 . Press the two workpieces to be bonded together immediately
after applying the glue and hold for about 30 seconds . The
glued bond is ready after about 5 minutes .
3 . During breaks in work, put the glue gun down on the stand 4 .
Switching the appliance off
♦ Unplug the appliance from the mains socket .
The nozzle 5 reaches a temperature of over 140°C .

Maintenance and cleaning

WARNING! Always remove the power plug from the
power socket before cleaning the appliance!
■ The low­temperature glue gun is maintenance­free .
■ Keep the appliance clean and dry at all times .
■ Never permit liquids to enter inside the appliance . Use a cloth to
clean the housing . Never use petrol, solvents or cleansers which
can damage plastic .
PNKP 105 B1
GB │ MT │ 49 ■