Maintenance And Cleaning; Disposal; Information; Service - Parkside PHKP 500 Bedienungs- Und Sicherheitshinweise

Operation / Maintenance and Cleaning / Disposal / Information
Switching off the device:
J
Pull the mains lead out of the mains socket.
Changing the nozzle:
j
Wear protective gloves.
j
Heat up the device for about 4 minutes.
Change the nozzle
J
Danger of burns! Touch the noz-
zle only by the heat shield
8
The nozzle tip is hot!

Maintenance and Cleaning

Q
The glue gun is maintenance-free.
J
Warning! Pull the mains lead out of the
mains socket before you clean the tool.
j
Always keep the device clean and dry.
j
Do not allow any liquids to enter the tool. Use
a soft cloth to clean the housing. Never use
petrol, solvents or cleaning agents that might
attack plastic.

Disposal

Q
The packaging is made entirely of recy-
clable materials, which you may dispose
of at local recycling facilities.
Do not dispose of electrical
appliances in household waste.
In accordance with European Directive
2002 / 96 / EC on used electrical and electronic
appliances and its implementation in national law,
used power tools must be collected separately and
recycled in an ecologically compatible manner.
Information on options for disposing of electrical
appliances after their useful life can be obtained
from your local or city council.
when it is hot.
8
.
9

Information

Q

Service

Q
Please refer to the warranty documents for
information regarding your national service point.
J
Have your device repaired only by qualified
specialist personnel using original manufactur-
er parts only.
Declaration of Conformity /
Q
Manufacturer
We, Kompernaß GmbH, Burgstr. 21,
D-44867 Bochum, Germany, hereby declare that
this product complies with the requirements of the
following EU directives:
EU Low Voltage Directive
(2006 / 95 / EG):
EN60335-1,
EN60335-2-45
Electromagnetic compatibility
(89 / 336 / EEC):
EN55014,
EN55014-2,
EN61000-3-2,
EN61000-3-3
Description of the device:
PARKSIDE Hot melt glue gun PHKP 500
Bochum, 31.10.2007
Hans Kompernaß
- Managing Director -
We reserve the right to make technical modifications in the course
of further development.
GB/MT 21