Configuration - WIKA TR33 Betriebsanleitung

5. Commissioning, operation / 6. Configuration
Medium temperature outside of the span
■
If the medium temperature exceeds that configured within the
transmitter an error will be signalled.
EN

6. Configuration

Configuration is carried out using a USB interface with a PC via
the model PU-548 programming unit (accessories, order number:
14231581). The connection with the thermometer is made via the
appropriate adapter cable (accessories: M12 x 1 circular connector,
order number: 14003193).
Measuring range, dampening, error signalling, Tag no. and other
parameters can be adjusted (see configuration software).
The measuring range is configurable between -50 ... +250 °C
[-58 ... +482 °F]. The configuration software checks the required
measuring range and will only accept permissible values. Intermediate
values are configurable - the smallest increment is 0.1 °C or 0.1 °F. The
thermometers are delivered configured to customer specifications within
the configurable limits.
Please note:
The measuring range of the thermometer is limited by the application
range of the measuring element, not by the setting range of the
transmitter.
18
Easy to use
■
LED status display
■
Compact design
■
No further voltage supply is needed for either
■
the programming unit or for the transmitter
(replaces programming unit model PU-448)
WIKA operating instructions model TR33