Finish Operation; Maintenance And Care - Kärcher SDP 5000 Betriebsanleitung

Manual operation
In manual opertions the pump remains switched
on continuously.
Note:
Dry run leads to increased wear and tear; do not
leave the pump unattended when it is running.
Switch off the pump within 3 minutes of dry run-
ning.

Finish operation

Rinse the pump with clean water after use.
Especially after running chlorinated water or
other liquids that leave residue behind.
Note
Contaminations can accumulate and lead to mal-
functions.
Disconnect the main plug from the socket.

Maintenance and Care

Maintenance
The appliance is maintenance-free.
Storage
Store the appliance in a frost free area.
CE declaration
We hereby declare that the machine described
below complies with the relevant basic safety
and health requirements of the EU Directives,
both in its basic design and construction as well
as in the version put into circulation by us. This
declaration shall cease to be valid if the machine
is modified without our prior approval.
Product: Pump
Type: 1.645-xxx
Relevant EU Directives
98/37/EC
2006/95/EC
2004/108/EC
Applied harmonized standards
EN 55014–1: 2006
EN 55014–2: 1997 + A1: 2001
EN 60335–1
EN 60335–2–41
EN 61000–3–2: 2000 + A2: 2005
EN 61000–3–3: 1995 + A1: 2001 + A2: 2005
The undersigned act on behalf and under the
power of attorney of the company management.
CEO Head of Approbation
Alfred Kärcher GmbH Co. KG
Alfred-Kärcher-Str. 28 - 40
D - 71364 Winnenden
Phone: +49 7195 14-0
Fax: +49 7195 14-2212
13
English