Operation Procedure - SPORTSTECH SX200 Benutzerhandbuch

8. OPERATION PROCEDURE

Power On:
To start up or to change the battery, open the back of the battery compartment and insert 4 AA batteries. Press
the RESET button for 2 seconds, then the monitor will turn on accompanied by a 1 second beep. The dsiplay
will show all segments for 2s, then display wheel diameter and unit for 1s. Then go to USER setting mode.
Without any signal input for 4 minutes, the monitor will go into Sleeping mode. Press any key to wake up the
monitor.
EN
37