SPORTSTECH SX200 Benutzerhandbuch Seite 30

Slide the seat post (12) into the vertical seat post (10) , at the desired position, align holes and fix in
place with the locking knob (25) and flat washer (26). Now fix the seat (13) to the seat post (12) as
shown. Insert the vertical seat post (10) into the main frame (16) and line up the holes. Secure the
saddle in position with the adjustment knob (7). The correct height for the seat can be adjusted after the
bike is fully assembled.
Slide the handlebar post (pt.17) into the handlebar post housing on the main frame. You will have to
slacken the knurled section of the spring adjustment knob (pt.7) and pull the knob back and then select
and align holes for the desired height. Release the knob and retighten the knurled portion.
Remove the bolts and spring washer from the handlebar post (pt.17), then fix the handlebar (pt.18) with
4pcs Ø8 spring washers (pt.19) and the M8*15 bolt (pt.20).
ATTENTION: YOU SHOULD FIX THE HANDLEBAR TIGHTLY!
Slide the computer (pt.23) onto the computer holder (pt.22) with a bolt (pt.81) and connect the plug
(A1&A2).
30