Fronius MAGIC WAVE 2000 FUZZY Bedienungsanleitung & Ersatzteilliste Seite 27

DEAR FRONIUS CUSTOMER
This brochure is intended to familiarise you with how to operate
and maintain your MAGIC WAVE 2000 Fuzzy resp. TRANSTIG
2000. You will find it well worthwhile to read through the manual
carefully and to follow all the instructions it contains. This will help
you to avoid operating errors - and the resultant malfunctions.
Your machine will repay you by giving you constant operational
readiness for many years to come.
FRONIUS SCHWEISSMASCHINEN
VERTRIEB GMBH & CO KG
Warning! The machine may only be put into service by
trained personnel, and only in accordance with the techni-
cal directions. Before you start using the machine, you
must read the section headed "Safety rules".
TABLE OF CONTENTS
Dear Fronius Customer ............................................................ 3
Safety rules ............................................................................... 4
General details .......................................................................... 6
Construction .............................................................................. 6
Commissioning - general details .............................................. 7
Technical data .......................................................................... 7
Setting-up instructions .............................................................. 7
Description of controls .............................................................. 8
1. Accessing the various program levels ................................ 12
2. Parameters ......................................................................... 12
Remote control operation ....................................................... 14
TR 53mc A.C. remote control unit .......................................... 14
TR 50mc remote control pulsing unit ...................................... 15
TR 52mc remote control pedal unit ........................................ 17
TR 51mc remote control spot-welding unit ............................. 17
TPmc remote control unit ........................................................ 18
TIG welding with high-frequency ignition (HF) ........................ 19
TIG welding with contact ignition (without HF) ....................... 20
Manual electrode welding ....................................................... 21
Care and maintenance ........................................................... 21
Checklist of LED's on NMW20 power-supply board ............... 22
Troubleshooting guide ............................................................ 23
Spare Parts List
FRONIUS - Sales and service offices
3