Sharpening Cutting Tools - Work Sharp WSKTS2-I Bedienungsanleitung

SHARPENING CUTTING TOOLS

PRUNERS, SHEARS, & OTHER BYPASS CUTTING TOOLS
NOTE: These tools usually have only one sharp, beveled blade. Re-sharpen ONLY the
beveled blade. These tools do not require sharpening to a precise angle; just let the
belt conform to the edge of the tool.
SET UP
Rotate Sharpening Cassette into
the Grinding position.
BELT
RED P220
STEP 1
Clamp pruners in a bench vise.
STEP 2
Make 2 to 4 strokes or until you are
satisfied with the sharpness.
NOTE: Some tools require the anvil to
be inserted through the grinding frame
opening (as shown) to allow belt access
to the cutting edge.
* Pull up on the Angle Guide to remove from
the Sharpening Cassette.
2 6 | S H A R P E N I N G C U T T I N G T O O L S
ANGLE GUIDE
REMOVED*
EDGE GUIDE
DOWN
SPEED
GRINDING (2)