Sharpening Gut Hooks - Work Sharp WSKTS2-I Bedienungsanleitung

SHARPENING GUT HOOKS

& BLADES WITH DEEP CONCAVE CURVES
NOTE: Follow instructions SHARPENING OUTDOOR KNIVES on the standard portion of
the blade using the Angle Guide set at 25°.
SET UP
BELT
PURPLE 6000
STEP 1
Place curve of gut hook over the belt on
downhill side; allow belt to conform to blade's
curve.
NOTE: Only use the downhill / right side of the
belt or you will cut the belt.
Squeeze power switch; hone 2 to 4 seconds.
STEP 2
Repeat STEP 1 on other side of gut hook.
* Pull up on the Angle Guide to remove from the Sharpening Cassette.
2 2 | S H A R P E N I N G G U T H O O K S
ANGLE GUIDE
REMOVED*
EDGE GUIDE
DOWN
SPEED
SHARPENING (1)