Work Sharp WSKTS2-I Bedienungsanleitung Seite 13

2. INSTALL DESIRED BELT
These engineered abrasives are long lasting and cool cutting.
1.
Push tensioner down and
rotate clockwise ¼ turn to
lock in place.
3.
Center belt on all three pulleys.
5.
PUSH + TWIST
The belt tracking screw (on back of
sharpener, with guide removed) can be
adjusted to correct belt tracking.
2.
SNAP
SNAP
Flip Edge Guide down and out of
the way to make belt changes
easier. Snap into place.
4.
Turn tensioner ¼ turn counter-
clockwise to release. Spin belt by hand
to ensure properly centered on pulleys
before powering up. Return the Edge
Guide to the up position.
S E T T I N G U P Y O U R S H A R P E N E R | 1 3