Sharpening Single-Bevel Knives - Work Sharp WSKTS2-I Bedienungsanleitung

SHARPENING SINGLE-BEVEL
KNIVES
SET UP
BELT
RED P220
STEP 1
Follow instructions for standard-edged knives on the
beveled side of the blade ONLY.
Continue until a slight burr develops on the flat side
(usually 5 strokes.)
STEP 2
Install PURPLE BELT
STEP 3
Hone flat side of the blade using the serrated guide.
TIP: It may be necessary to repeat this alternating
process of bevel sharpening and back honing to
achieve the sharpest results (no burr).
ANGLE GUIDE
FLIP UP (20°)
and repeat STEP 1.
EDGE GUIDE
UP
HEEL
S H A R P E N I N G S I N G L E - B E V E L K N I V E S | 2 3
SPEED
SHARPENING (1)