Sharpening Edged Tools - Work Sharp WSKTS2-I Bedienungsanleitung

SHARPENING EDGED TOOLS

SHOVELS, HOES, AXES, PICKAXES, POST-HOLE DIGGERS, &
OTHER EDGED TOOLS
NOTE: Tools such as these do not require sharpening to a precise angle; just let
the belt conform to the edge of the tool. It will take longer to restore an edge to
severely damaged tools.
SET UP
Rotate Sharpening Cassette into
the Grinding position.
BELT
GREEN P80
STEP 1
Clamp tool to be sharpened securely
in bench vise.
STEP 2
Squeeze power switch; grind edge of
tool until you are satisfied with the
sharpness.
* Pull up on the Angle Guide to remove from
the Sharpening Cassette.
ANGLE GUIDE
REMOVED*
EDGE GUIDE
DOWN
S H A R P E N I N G E D G E D T O O L S | 2 5
SPEED
GRINDING (2)
45°