11 Ec-Declaration Of Conformity - GF CONTAIN-IT Plus Bedienungsanleitung

Instruction Manual

11 EC-Declaration of conformity

EC Directive 97/23 EC
The manufacturer, Georg Fischer Piping Systems Ltd, 8201 Schaffhausen
(Switzerland), declares that the CONTAIN-IT Plus diaphragm valves type 514, 515,
517, 519
1. are pressure-bearing components in the sense of the EC Directive 97/23 EC
concerning pressure equipment and that they meet the requirements
pertaining to valves as stated in this directive.
2. Correspond to the respective requirements for valves pursuant to Directive
89/106/EC concerning building products.
Following harmonized standards were also used:

EN ISO 16138
The CE emblem on the valve refers to this accordance (as per the directive on
pressure equipment, only valves larger than DN 25 may be marked with EC).
Operation of these diaphragm valves is prohibited until conformity of the entire
system into which the diaphragm valves have been installed is established
according to one of the above mentioned EC directives. Modifications on the
diaphragm valve which have an effect on the given technical specifications and the
intended use render this manufacturer's declaration null and void. Additional
information is contained in the "Georg Fischer Planning Fundamentals".
Name: Antonio De Agostini
Position: R&D Manager
Georg Fischer Piping Systems
Date: 2014-02-26
54
EC-Declaration of conformity