Pressure Testing The Inner Pipe - GF CONTAIN-IT Plus Bedienungsanleitung

Instruction Manual
6.2

Pressure testing the inner pipe

WARNING
Risk of injury and/ or damage due to pressure testing!
Using hazardous media for pressure testing may put the installation at risk
and cause physical damage or bodily harm in case of leakage.
 The pressure test must be performed using non-harzardous media (e.g
water) and with due care and attention in handling.
 Please pay attention to the instructions in the user manual for
diaphragm valve type 514, 515, 517, 519.
 Check to make sure the protective housing is open (cover removed) to determine
if there is leakage during the pressure testing.
 The pressure test must be performed with water or another non-hazardous
medium. See DVS 2210-2 with reference to DVS 2210-1, Suppl. 2, as well as the
instructions contained in the above mentioned Installation and Instruction
Manual for Diaphragm Valve Type 514, 515, 517, 519.
 When the pressure test has been successfully completed, proceed to
Assembling the CONTAIN-IT Plus Diaphragm Valve
42
Commissioning