Initial Startup - Kärcher RCW 5 Bedienungsanleitung

Cleaning robot
10
Securing straps
11
Loop
12
Eye
13
Retractor
14
Lever
15
Suction cup
16
Safety line
17
Snap hooks
18
Safety system
19
Charger
20
Charging plug
21
Detergent RM 506
22
Package of microfibre cleaning cloths
23
Reservoir cover
24
Tank with filter inlay
25
Storage space accessories
26
Cleaning robot mount
27
Battery terminal station
28
Valve contact station
29
Valve station
30
Charging socket
31
Cleaning device
32
Microfibre cleaning cloth
33
Intake cleaning cloth
34
Squeegee blade drive wheel
35
Drive wheel
36
Protection filter
37
Bar cover
38
Suction cup
39
Main seal
40
Cleaning brush
41
Collision and edge sensor
42
Valve cleaning robot
43
Battery terminal cleaning robot
44
Valve contact cleaning robot
45
®
* Bluetooth wireless technology
Function and operation
The device consists of three units: the battery-powered
cleaning robot, the station and the safety system.
KÄRCHER microfibre cleaning cloths and the KÄRCH-
ER cleaning agent RM 506 are also required for opera-
tion.
Cleaning robot
The cleaning robot is intended for cleaning vertical,
framed glass surfaces. The cleaning is performed by a
cleaning brush and a microfibre cleaning cloth, which is
continuously moistened with detergent.
The cleaning robot adheres to the glass surface to be
cleaned via a self-generated vacuum and moves it
down automatically. With the KÄRCHER
Home & Garden app, the user can control the device if
necessary or have heavily soiled areas run over several
times..
The cleaning robot obtains its energy from a built-in bat-
tery. With one battery charge, the device can clean
glass surfaces up to 50 min long or 20 m² .
In the station, the battery of the cleaning robot is
charged and its tank filled with detergent.
The charging and filling process is automatically activat-
ed by inserting the cleaning robot into the station.
The cleaning robot and the accessories (safety system,
cleaning cloths, charger) can be stored in the station
when not in use.
The properly installed safety system can prevent the
cleaning robot from falling unbraked in the event of a
malfunction or accident.
The safety system consists of a retractor with safety line
and snap hook and a suction cup for attachment to
smooth surfaces. The retractor must be additionally se-
cured with a safety strap.
Cleaning programs
Four washing programs are available:
1 Full cleaning
The cleaning robot cleans the entire glass surface
and then the entire edge area once.
2 Partial cleaning
The cleaning robot cleans only the lower, more fre-
quently soiled part of the glass surface, e.g. on bal-
cony or patio doors.
3 Intensive cleaning
(Can be activated via the KÄRCHER
Home & Garden app) Full or partial cleaning is car-
ried out twice.
4 Manual cleaning
(Can be activated via the KÄRCHER
Home & Garden app) The path of travel of the
cleaning robot can be selected for example, to clean
particularly soiled areas individually or repeatedly.
1. Set up the station in a horizontal, level position.
Illustration B
ATTENTION
The location must not be near a heat source (radiator,
room fireplace, etc.) and must not be exposed to direct
sunlight. Otherwise the effectiveness of the detergent
will be reduced.
1. Unscrew the detergent compartment lock.
Illustration C
2. Open the tank cap and pour the cleaning agent into
the station's tank, observing the MIN and MAX
markings.
English
Station
Safety system

Initial startup

Setting up station
Filling the station
19